RENEW Project Documentation

Version 1.0

Reconfigurable Ecosystem for Next-generation End-to-end Wireless

Software

Software Quick Start

Install Soapy

Install SoapySDR, SoapyRemote, and Sklk-SoapyIris (Skylark) drivers on Ubuntu 16.04 or later. This script will also install all the required dependencies: install_soapy.sh.

To setup the PC to enable Iris apps, run ./install_soapy.sh. After install is complete, run SoapySDRUtil --find. If no Iris device (or any other Soapy supported device) are detected, you will get a no device found! message. If not a list of detected Irises or soapy devices are listed with a format similar to the following example:

Found device 0 
driver = iris
feSerial = FE3B000111
feVersion = 72efe6b 
firmware = 2018.05.2.1-28-3fe1afc 
fpga = 2018.05.2.1-b30d907 
frontend = IRIS-FE-03-CBRSb 
label = IRIS-030B - 0294 
remote = tcp://10.224.120.19:55132 
remote:driver = iris-arm 
remote:type = iris 
revision = Iris-030b 
serial = 0294

Install C++ Libraries

To install all additional libraries required to use the C++ RENEW Desing Flow, run install_cclibs.sh.

Install Python Libraries

To install all additional libraries required to use the Python RENEW Desing Flow, run install_pylibs.sh

Last updated on 19 Mar 2019 / Published on 12 Feb 2019